Re: Mixed 10Gb and 1Gb devices
Hi, I would put the NAS on 10G too if possible and if the NAS supports 10G and have the Dell connected to DMZ switchassuming you don't have anything else on the storage switch and you can effectively...
View ArticleRe: Mixed 10Gb and 1Gb devices
The problem is that I cannot connect Dell with DMZ Switch because the latter is an HP with RJ45 and SFP ports (1gb max), while the Dell is 10gb SFP+ fixed. Because of it, I would know if there was a...
View ArticleRe: Mixed 10Gb and 1Gb devices
What you can do is create a VM (router or firewall such as pfSense®), create 2 network adapter on that VMnetwork adapter 1 for internal connected to Dell 10Gnetwork adapter 2 for external/DMZ connected...
View ArticleRe: Mixed 10Gb and 1Gb devices
Thank you very much! And what do you think about connect 2 switches for redundancy at the firewall(s)?
View ArticleRe: Mixed 10Gb and 1Gb devices
I'm sorry I don't get on what are you referring to about connecting 2 switches for redundancy at the firewalls.Could you explain more about this or provide a diagram of your idea on this so?
View ArticleRe: How to disable DST MAC check on ESXi?
The settings you listed should do the trick. Have you tried rebooting your ESXi server?
View ArticleClik here to view.
Clik here to view.
Re: Mixed 10Gb and 1Gb devices
That looks better in my opinion as you have redundancy across all connectivity with this design.Using redundant connectivity to firewall as per your diagram is common setup, as per the SonicWall KB...
View ArticleRe: Mixed 10Gb and 1Gb devices
I know very well this diagram and it works with only one switch on server side. (LAN Switch) But if I have 2 switches on server side like my diagram as using vDS with Route based on physical NIC load...
View ArticleClik here to view.
Re: Mixed 10Gb and 1Gb devices
I don't know much about Dell Sonicwall setup but I was assuming that the diagram from that KB is a logical diagram.The physical diagram would probably look like below taken from this doc...
View ArticleClik here to view.
Re: Mixed 10Gb and 1Gb devices
the last diagram is for Supermassive line of Sonicwall that they costs from 15000 euros and up. With NSA3500 I can only pair X0 with X2 in "layer2 Bridge mode" or in "2-wire mode" (How to Configure...
View ArticleClik here to view.
Urgent add physical network to vSwitch Management Network (VMkernel)
Hi All,- My situation: I have a cluster VMware with 02 host, which it have information as below:+ Config vSphere HA+ Host 01: 01 management standard switch: only physical adapter network+ Host 02: 01...
View ArticleRe: Urgent add physical network to vSwitch Management Network (VMkernel)
And then, I remove the physical to vSwitch Management, and result is: I can not connect this host via vSphere Client,Can you please clarify what exactly you did remove? You'll need at least one active...
View ArticleClik here to view.
Re: Urgent add physical network to vSwitch Management Network (VMkernel)
Hi André, Thank you for your reply. I show you step by step I did- First of all, my management network as below information, with only physical adapterAnd I want add one more physical adapter to...
View ArticleRe: Urgent add physical network to vSwitch Management Network (VMkernel)
Dear All, Do you have solution for me? Thanks
View ArticleRe: Urgent add physical network to vSwitch Management Network (VMkernel)
Hi All, I restart the host and issue resolved Thanks for watching my post
View ArticleClik here to view.
Unknown EtherType handling in DVS
Hello Experts, Wanted to know how unknown ethertype packets from VM are handled by DVS. I see following stats when unknown ethertype packets are received by DVS. esxcli network port stats get -p...
View ArticleRe: LLDP not working with Intel X710 cards
Where is the driver available, do you have a link? thanks
View ArticleRe: LLDP not working with Intel X710 cards
Hi. I am not sure if you need a firmware pair to go with this though. And I havent tried it yet. https://my.vmware.com/group/vmware/details?downloadGroup=DT-ESXI65-INTEL-I40EN-156&productId=615...
View Articlemtu to 9216?
Hi , Is there a way to change the mtu to 9216? ESXI is not letting the guest OS to go more than MTU size of 9000 even though physically it can support upto 9216, in a SRIOV scenario. Guest OS asks...
View Article
