Re: how to set up to 2 different networks with ESXI 5.1?
Like in a physical environment, you need to provide proper routing between the two subnets. Either by setting up a (virtual) router or - if this is sufficient for you - by configuring static routes in...
View ArticleRe: how to set up to 2 different networks with ESXI 5.1?
Thank you for the answer. I don't have any router at home, I only have a 3g broadband connection on my mobile.Can I do it virtually on the vsphere client?
View ArticleRe: how to set up to 2 different networks with ESXI 5.1?
You could create a second vSwitch (without uplinks) for the 10.x network and install a router/firewall VM (e.g. pfSense), connect this to both vSwitches and route the traffic. André
View ArticleRe: how to set up to 2 different networks with ESXI 5.1?
Thank you for the answer and for your time.I'm downloading pfSense and will do my best to set it up.I will post later the result.
View ArticleClik here to view.
Re: Does a Nexus 1000v virtual switch setup have a fast througput than the...
Yep, they have advanced vNIC features and can easily integrate to converged network adapters (CNA) and do FCoE with Nexus 5k. I recently attened their jumpstart and it really is convenient to use the...
View ArticleRe: Enabling/Configuring IPv6
Did you reboot the host after enabling ipv6?I believe the host setting only matters for vmk's though.
View ArticleClik here to view.
Re: how to set up to 2 different networks with ESXI 5.1?
Hi, I have installed Pfsense but it's not working. My configuration : ESXI networkingPfsense Dashboardpfsense gatewaypfsense static routesMy goal is to have the Vswitch 0 communicates with the...
View ArticleRe: Connecting an ESXi server to a wireless network
Should work. You connect the bridge to the wireless network then it basically acts as a switch for anything you plug into it.
View ArticleRe: Network settings
sorry for late reply. OK thanks. the environment is quite small. How do you think I should set up and config the environment? I don't have any access to the network config so that I can change...
View ArticlevSphere client over ssh tunnel on a guest OS ?
Hey there, I'm not quiet sure if this is the right place to ask this question but since it is kinda network related I post it here enayway. imagine following situation a ESXi 5.1 Host hosting a openBSD...
View ArticleNot able to define qos type queuing (CBWFQ) on Nexus 1000V
Hello does someone knows why I get this error on my Nexus 1000V version 4.2(1)SV2(1.1a) ? switch-01(config)# class-map type queuing pippoERROR: Command (id: 2) not supported should I enabe queuing...
View ArticleRe: vSphere client over ssh tunnel on a guest OS ?
Welcome to the Community -If you were to add a second virtual NIC to your openBSD VM and place it on the management network you then would be able to use SSH to manage you VM directly -
View ArticleClik here to view.
Re: vSphere client over ssh tunnel on a guest OS ?
hey thx for the fast answer, I just set up a vm to thest the scenario now anyway. If you dont mind I would like to add a nother question. Is it possible to assign the static ip directly to the guest by...
View ArticleRe: vSphere client over ssh tunnel on a guest OS ?
You will need to create two virtual switches - one that will use the NIC connected to the outside world and one that is connected to the NIC on the management network. This allows for you to assign...
View ArticleRe: vSphere client over ssh tunnel on a guest OS ?
well we openBSD is the way to go when it comes to secure OS in the net though ... never got a problem with this OS
View ArticleRe: No network on RHEL 6.2 using VMXNET3
Dear Rupesh, I run into the similar issue today. We have a centos 6.2 vm installed on ESXi 5.1.0 with three vmxnet3 NIC, static IP configured and vm running for a while already with no problem. But...
View ArticleCenter Mobile Access inistallation problem
Hii downloaded vCenterMobileAccess.ovf and added it on deploy OVF template in vmware vsphere client 5.1.0i choosed Thin provisionin deploying vCenter Mobile Access step i see one problem every timeit...
View Articledirectory servic in authentication
Hisorry i'm a begginer user maybe my quastion is primitivewhat is directory servic in authentication servic menu?can i force a vm to use a static ip with this option?what should i insert in domain box...
View Article