Users rights management in vCenter
Hello,I would like to know if it is possible to allocate a quantity of RAM, storage for a user? and this automatically for each user who connects from an ADAfter searching the web I can't find an...
View ArticleRe: Users rights management in vCenter
Yes, using vRealize Automation. vCenter/vSphere do not have this ability built in because they aren't designed for such "cloud"-type operations.
View ArticleRe: Users rights management in vCenter
thanks for your reply. Need any additionnal licence ?
View ArticleClik here to view.
Clik here to view.
Port mirroring of a physical server
Hello, I'm wondering if anyone could offer some advice. We run a call recording application - this usually consists of two physical servers. Server A has 2 x NICs, one of which needs to mirror the...
View ArticleClik here to view.
NSX traffic flow
Hi , I am preparing for NSX I am having confusion on the below . Please help on the same. - How to different VMs in different logical switches will communicate ?- How two transport zones will...
View ArticlePort mirroring not working on distributed switch configured as LACP.
I have read that Port Mirroring is not supported on Distributed Switch configured with LACP. Is there another way to mirror ports when using LACP? I read it here: Limitations of the LACP Support on a...
View ArticleClik here to view.
Re: Port mirroring not working on distributed switch configured as LACP.
In the link it says: " The LACP control packets (LACPDU) do not get mirrored when port mirroring is enabled."Does that mean that I can use Port Mirroring and LACP on distributed switch, but only the...
View ArticleClik here to view.
Moving a ESXi cluster with LACP/LAG configured on VM traffic uplinks
I have a cluster of 8 nodes running in vCenter 6.5 and want it to move to another vCenter.The VM traffic phy uplinks (two of them) are configured with a LAG in DVS. i have created a VSS in every host...
View ArticleClik here to view.
Re: Moving a ESXi cluster with LACP/LAG configured on VM traffic uplinks
LACP is supported on the vDS only. I'm guessing that when you move one uplink to the VSS you'll need to configure the physical port to remove it from the port-channel. Essentially do the reverse of...
View ArticleClik here to view.
Re: Moving a ESXi cluster with LACP/LAG configured on VM traffic uplinks
Thanks for the reply. I too believe that physical port to be removed from the port-channel, but is there any vmware article or KB to confirm this?I found this William's post...
View ArticleClik here to view.
Re: Can't Remove Host from dvSwitch
Very helpful. Thanks for this.One note, we actually had to delete the vmkernel adapter on that dvswitch, disconnect host, reconnect host, and then hit remove on the dvswitch again (still receiving...
View Articlevm nic
Which network adapter does the virtual machine use? how can I find. There are 4 nic' connected to the virtual switch.
View ArticleRe: vm nic
We have no idea unless we can see your VM's configuration. You're also not providing nearly enough information, which you continue to do.
View ArticleRe: Port mirroring not working on distributed switch configured as LACP.
I have tested it, so yes I can use Port mirroring.
View ArticleClik here to view.
Re: vm nic
One way is to connect to the host via putty, and run esxtop (press 'n' for network'). André
View Articlephysical switch
I have 4 esxi host . There are 4 physical ethernet cards on each esxi and also There are 2 physical switches . one of the ethernet cards for esxi managent. one for vmotion and the other two for virtual...
View ArticleClik here to view.
Re: physical switch
This depends on how many VLANs you'll use for VM access. Is it one? Ten? Also, how are your switches configured to operate?
View Articleesxi management network lost
I have ESXi server 6.0 u3. 4 nic ports are connected to the management port ( VLAN 10). no VM on the cluster. now ping sending another from VLAN to management ESXi IP so ping breaks occasionally. (...
View Article
