Re: How to cfg specific adapter for vmkernel services
1. Create a dedicated port-group for each service (vsan-pg,mgmt-pg,vmotion-pg) and add the only uplink in active rest you can push down as unused or standby on the same switch 2.2. In order to remove...
View ArticleClik here to view.
Re: Ex VCP 5.5 needs help. It has been a long time since I setup a vSphere...
Hi On the vSphere/ESXi side yes you should use the HPE custom images that can be downloaded from the HPE vibsdepot here: HPE Software Delivery Repository vibsdepot (aka HPE Online Depot)On the firmware...
View Articlewhat is the purpose of uplinks in Distributed Switch?
what is the purpose of Uplink in distributed switch? as far as i know its used to connect vmnic to distributed switch, is that correct?
View ArticleClik here to view.
Re: what is the purpose of uplinks in Distributed Switch?
Yes, an uplink is the physical connection between the network adapter in the host and a physical switch. André Moderator note: Discussion moved from 3. Networking - Standard Switch [ARCHIVED] to VMware...
View ArticleMultiple NIC NAS with SFP+ Directly Connected + 3 HOSTS + HA + DRS + 6.5...
Good day all, I am trying to max out the performance of the NAS but at the same time I have to be very cautious as I have to deploy ESXI in 3 datacenters and the links between them are just 1Gb. All...
View ArticleClik here to view.
strange behavior of vDistributed Switch while rebooting one of the connected...
Hello everybody, I have six ESXi server in a cluster. All are on v65 including the vCenter. Everything is up to date. Two months ago I started with a distributed Switch on server1. This worked...
View ArticleClik here to view.
Too many connections to VM, high ping, how to increase bandwidth?
Good day sirs!We have a bottleneck with RDS server.Due to overload esxi host, we can not create cluster for now.There is more than 100 connections per VM.So the problem is very high ping latency to it:...
View ArticleRe: Too many connections to VM, high ping, how to increase bandwidth?
Hello spoollka! Well, first of all, a lot of information we need!Do you have vSS (virtual Standard Switches) or vDS (virtual Distributed Switches)?How many nics per host?Actual configuration (vmkernel,...
View ArticleClik here to view.
Re: Too many connections to VM, high ping, how to increase bandwidth?
Here`s my configuration.I`ve tryed to relocate my VM with physycal separate adapter, but it still doesnt works as expected...
View ArticleIssue with adding physical adapter to virtual switch
Hi, I seem to be having this issue: Re: Cannot add network adapter to ESXi 6.5 VM? . I was trying to reset the interface so I removed the physical adapter from the vSwitch. When I go back to the...
View ArticleRe: Issue with adding physical adapter to virtual switch
Which version/build of the Web Client do you use?The latest version can be found at ESXi Embedded Host Client André
View ArticleClik here to view.
Re: Issue with adding physical adapter to virtual switch
Try with above mentioned host client, alternatively you can SSH to host and execute the following command replacing vSwitch and vmnic name accordingly. esxcli network vswitch standard uplink add...
View ArticleRe: Issue with adding physical adapter to virtual switch
I see that I am running:Client version: 1.21.0 Client build number: 5724747 ESXi version: 6.5.0 ESXi build number: 5969303 Looking at ESXi Embedded Host Client the latest version is 1.23.0. What is...
View ArticleRe: Issue with adding physical adapter to virtual switch
That's what I did for now but I would like for the GUI to work. I am going to work on upgrading to the latest. Waiting on a response to my other question.
View ArticleRe: Issue with adding physical adapter to virtual switch
Yes. to update the Embedded Host Client you can either use the URL (if the host has Internet access), or to download the .vib, upload it to a datastore and enter the vmfs path e.g....
View ArticleRe: Issue with adding physical adapter to virtual switch
As Andre mentioned above, download vib and put it in datastore. Then execute command. Once command executed, you can access host via https://yourhostip/ui esxcli software vib install -v...
View ArticleRe: Issue with adding physical adapter to virtual switch
I did that but I am still having the errors that others mentioned when trying to add NIC cards, with the system saying the network it's connected to is not valid etc. I assume this is a bug?
View ArticleClik here to view.
Re: Issue with adding physical adapter to virtual switch
Please upload : 1. Output of esxcli network nic list2. Snapshot of error, vSwitch up-links snapshot.
View ArticleRe: Too many connections to VM, high ping, how to increase bandwidth?
Hello, Ok, so RD01 is connected with adapter vmnic02 ( 1000 ), is there a possibility to attached vmnic03 to the same switch to spread the load on 2 nics?Did you some testing with perfmon?
View ArticleRe: Too many connections to VM, high ping, how to increase bandwidth?
2 nics to RD01? That is too many i think Anything else?Did you some testing with perfmon?Nah... what should i looking for?No probs with CPU\Memory.
View Article